In winter, roads are salted, and moisture and dirt accumulate on the bottom, wheel arches and sills. This is where rust usually starts. Winter anti-corrosion protection (or its renewal) is one of the cheapest ways to preserve the body of your car.

Where does rust most often occur?

  • The bottom and its seams
  • Wheel arches
  • Thresholds and their internal cavities
  • Door bottoms and interior cavities
  • Luggage compartment floor and spare wheel wells

What measures are intended for whom?

For cavities (thresholds, doors, beams) highly permeable, moisture-wicking agents are used, e.g., DINITROL ML. They penetrate the seams and form a protective film.

For the bottom and wheel arches requires a thicker, impact-resistant coating, e.g., DINITROL 4941 whether DINITROL 479.

For universal protection suitable DINITROL 1000 – penetrating thixotropic coating.

If the metal has already started to rust, it is worth using a rust-binding anti-corrosion primer before painting, e.g., BRUNOX Epoxy aerosol, or epoxy primer. What are the differences between primers – read here.

How to perform anti-corrosion treatment

  1. Wash the bottom and arches well, remove dirt and peeling old coating.
  2. Allow the car to dry completely – moisture under the coating accelerates corrosion.
  3. Remove loose rust by brushing or sanding, and treat rusted areas with primer.
  4. Mask off the brakes, exhaust system and other parts that the coating should not get on.
  5. Treat the cavities with a penetrating agent, and the bottom and arches with a thicker coating.
  6. Allow the coating to dry according to the manufacturer's instructions.

It is worth checking and renewing anti-corrosion protection annually, preferably in the fall, before the salt season.

You can find all DINITROL and other anti-corrosion products in our store in Kaunas and online. Don't know what your car needs? Contact us – we will advise.

Privacy Preference Center