DINITROL 445 0.5L
10,32 € 8,53 € (excluding VAT)
53 in stock
🚚 We deliver to Lithuania, Latvia and Estonia. This item is not shipped to other EU countries - it is a dangerous good (ADR).
- ✓ Order preparation 1–3 days, delivery in Lithuania 1–2 days.
- ✓ 15+ years of experience
- ✓ Need help? +370 662 28172
- Free shipping on orders over €100
- Returns within 14 days (paints mixed by code are not refundable)
- All taxes and duties included
DINITROL® 445 – flexible, black material designed to protect the car body from corrosion and the impact of road stones. It has sound-absorbing properties and can be painted. It does not contain aggressive solvents (e.g. chlorinated hydrocarbons), so it does not affect PVC coatings. The material is used to protect the bottom of the vehicle, wheel arches, door sills, spoilers, etc. from corrosion and mechanical impact of stones. It can be used in the manufacture or repair of vehicles.
Shake the container well before use, or in the case of an aerosol, until you hear the metal ball inside. The surface to be coated must be completely clean and dry, free of rust or oil. It is recommended to use Dinitrol® Autocleaner clean, as well as remove excess polish or protective wax from painted areas. When using non-aerosol packaging, use a special hand sprayer or special equipment providing a pressure of 4-5 bar. For optimal corrosion protection, it is best to spray from a distance of 30 cm; it is recommended to apply several coats to a wet film thickness of 1-2 mm, with the thicker coat applied in those in places, where the impact of pebbles is greater (in wheel arches, etc.). Dries at room temperature. The dried coating can be painted with any acrylic repair paint. When painting with multi-component or cellulose paints, the surface must be completely dry. A stream of warm air accelerates drying.
ATTENTION: Do not spray on brake pads and discs or exhaust system components.
Composition: rubber, synthetic rubber and solvent
Color: black
Density: at -20 °C approx. 0.92 g/ml
Consumption: 4–5 l per car for optimal protection against mechanical impact and sound absorption
Viscosity: about 700 mPa
Temperature resistance: from -20 °C to +90 °C
Resistance: water, road salt and precipitation, withstands 1000 hours of salt spray test)
Drying (DIN 50014): aerosol – 20–30 min., 1 l – 30 min.
Solvent/Thinner: White spirit
Dry matter content: about 42%
Storage: at a temperature not lower than +15 °C and not higher than +25 °C. Keep packages, especially aerosols, away from direct sunlight and heat sources. Unopened containers can be stored for 12 months.
| Weight | 0,5 kg |
|---|
Add a review
Delivery
Most orders are processed within 1-3 business days of payment confirmation. Once shipped, delivery to the Baltics usually takes 1-2 business days. International delivery times vary by country and courier service. The shipping cost and delivery time are displayed at checkout.
Return
Paint mixed according to color code is not returnable.
Other items can be returned within 14 days of purchase. The returned item must be:
- unused;
- in the same condition as you received it;
- in original packaging.
For more information, please visit Delivery terms and In the return policy.








